Overview



ATEN AP206 is a dual-channel DSP-equipped amplifier that delivers 60 W per channel in a compact enclosure. The support for balanced / unbalanced line level inputs and the capability of driving 4 ohm low impedance or 70/100V line (in Bridge mode) loudspeaker systems have made AP206 suit a wide range of public address applications. Configurable through an intuitive WebGUI, the built-in DSP allows Speaker EQ, 5-band EQ, delay, limiter, and up to 20 presets for precise tuning and extensive audio system protection purposes. Ground lift is deployed to eliminate unwanted hum noises from power circuit. Immersive sound experience is delivered with no compromise on power efficiency thanks to the amplifier’s Class-D design and ENERGY STAR qualification, conserving energy while lowering operational costs. Customizable Auto Standby mode enables the AP206 to automatically switch to “sleep” when the signal level comes lower than -40 / -50 dBu for 10 / 15 / 25 minutes.

Speaking of the system protection circuit, the AP206, along with the speakers connected to it, are prevented from damages led by shorted outputs, over / under-voltage, high frequency overload, and overtemperature. Plus, the amplifier will be muted when the heat sink temperature exceeds the limit. The fanless design avoids fan noise and prevents dust from building up inside the chassis.

Engineered to deliver the ultimate flexibility, the AP206 features an expansion slot for plugging in AP901 2-CH Dante Expansion Card to make the sound system compatible with Dante network or AP902 2-CH Mic/Line Pre-AMP Expansion Card to receive two channels of mic / line input signals. The amplifier can also be integrated with VK Control System via RS-232 and Ethernet connection for comprehensive control even from a distance. Mounting hardware is available for rack or surface-mounting depending on the installation needs. With a rich set of features, the AP206 assures reliable amplification with professional audio quality and high power efficiency for any enterprise-grade applications that require high quality sound reinforcement and distribution.




Reasons to buy


  • A dual-channel DSP-equipped amplifier that delivers 60 W per channel in a compact enclosure
  • Amplifier will be muted when the heat sink temperature exceeds the limit
  • Built-in WebGUI-configurable DSP allows speaker EQ, 5-band EQ, delay, limiter, and up to 20 presets for precise tuning and system protection
  • Class-D design with ENERGY STAR qualification for high power efficiency
  • Customizable Auto Standby mode – Amplifier automatically switches to “sleep” when the signal level comes lower than -40 / -50 dBu for 10 / 15 / 25 minutes
  • Expansion slot for add-on expansion card – Install AP901 2-CH Dante Expansion Card to make the sound system compatible with Dante network or AP902 2-CH Mic/Line Pre-AMP Expansion Card to receive two channels of mic / line input signals
  • Fanless design – Avoids fan noise and prevents dust from building up
  • Firmware upgradable
  • Ground lift deployed to eliminate unwanted noises from power circuit
  • Integrated protection circuit – Protects the system from damages caused by Amp shortcut, Amp output over/under voltage, high frequency overload, and overtemperature
  • Supports balanced / unbalanced line level inputs and drives 4 ohm low impedance or 70/100V line (in Bridge mode) loudspeaker systems
  • Supports rack or surface-mounting
  • Supports VK Control System via RS-232 and Ethernet connection

Specification


Technical Description: ATEN 2x60W Audio Amplifiers - Black

Audio
Frequency range:The lowest and the hightest frequencies that can be inputted/produced.
50 - 20000 Hz
RMS rated power:RMS (Root mean square) is a measure of the continuous power required by a device, in particular audio amplfiers and loudspeakers.
120 W
Output impedance:
600 O
Input impedance:
20000 O
Total Harmonic Distortion (THD):Total harmonic distortion is a measure of non-linear harmonic\n\ndistortion and is given in %. Non-linear harmonic distortions are\n\nsignals which were not present in the original before the signal was\n\nconverted by the headphones. These unwanted signals are caused by the\n\ndiaphragm, whose movements do not precisely move in time with the\n\nelectric signals that cause it to move. Unfortunately, this is a\n\nfeature of all electroacoustic transducers. Although it cannot be\n\ncompletely eliminated, suitable steps can be taken to minimise it.\n\nHowever, the user is not interested in why this distortion takes place\n\nbut in how great the level of distortion must be for it to become\n\nperceptible. According to the findings of several research projects, a\n\ntotal harmonic distortion of 1% in the frequency range of 100 to 2000\n\nHz is imperceptible. Below 100 Hz, the perceptibility threshold lies\n\nat 10%.
0.1%
Amplifier class:An electronic amplifier, amplifier, or (informally) amp is an electronic device that increases the power of a signal. It does this by taking energy from a power supply and controlling the output to match the input signal shape but with a larger amplitude. Power amplifier circuits (output stages) are classified as A, B, A/B and C for analog designs, and class D and E for switching designs based on the proportion of each input cycle (conduction angle), during which an amplifying device is passing current.
D
Peak power per channel:The maximum power (usually measued in watts) that can be transmitted through a channel.
120 W

Certificates
Certification:
FCC, CE, UKCA

Logistics data
Master (outer) case gross weight:
3.5 kg
Master (outer) case height:
140 mm
Master (outer) case length:
462 mm
Master (outer) case width:
322 mm
Harmonized System (HS) code:
85184000

Operational conditions
Operating relative humidity (H-H):
0 - 80%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-20 - 60 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 50 °C

Packaging data
Package weight:Weight of the packaged product.
3.5 kg
Package height:The distance from the top to the bottom of the packaging.
140 mm
Package depth:The distance from the front to the back of the packaging.
462 mm
Package width:The distance from one side of the packaging to the other.
322 mm

Ports & interfaces
Number of Euroblock input connectors:
2
Number of Euroblock output connectors:
2
RS-232 connector type:
3-pin
RS-232 ports:The number of sockets (ports) for RS-232. An RS-232 serial port was once a standard feature of a personal computer, used for connections to modems, printers, mice, data storage, uninterruptible power supplies, and other peripheral devices. Now it has been largely replaced by USB and other ports.
1
Speakers connectivity type:The type of connection used for the speakers e.g. RCA connector.
Euroblock

Power
Maximum current:The greatest possible amount of current, which is a quantity representing the rate of flow of electric charge.
2 A
Power protection features:Features that protect the device against power problems e.g. overload.
Overload, Under voltage
AC input frequency:
50/60 Hz
AC input voltage:The voltage of the AC electricity that is inpitted into the product.
100 - 240 V
Power source type:What the power source is.
AC

Technical details
Country of origin:Country where the device is made.
Taiwan
Material:The material from which a thing is or can be made e.g. wood, plastic.
Metal
Product colour:
Black
Connectivity technology:
Wired

Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
2.15 kg
Height:The measurement of the product from head to foot or from base to top.
44 mm
Depth:The distance from the front to the back of something.
200 mm
Width:The measurement or extent of something from side to side.
323 mm


Product details


AP206 ATEN 4710469348853

ATEN 2x60W Audio Amplifiers - Black

£774.17 and In stock

SKUAP206

ATEN 2x60W Audio Amplifiers - Black

Quick Code: Q1402474 MPN: AP206

You need to be logged in to see Prices

Log In For Prices
Dont have an account? Contact Us

Key Features

  • Supports rack or surface-mounting
  • Firmware upgradable