Main product

Overview


The Cisco SFP-10G-SR-X is a multirate* 10GBASE-SR, 10GBASE-SW and OTU2/OTU2e module for extended operating temperature range. It supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade Multimode Fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.




Specification

Technical Description: Cisco SFP-10G-SR-X network transceiver module Fiber optic 10000 Mbit/s SFP+ 850 nm
Features
Hot-swap:
Yes
Plug and Play:Indicates whether this product supports is "plug and play". Plug and play is hardware or software that, after being installed ("plugged in"), can immediately be used ("played with"), as opposed to hardware or software which requires configuration.
Yes
Product colour:
Beige

Performance
Rx power (max):
-9.9 dBmW
Rx power (min):
-1 dBmW
Tx power (max):
-7.3 dBmW
Tx power (min):
-1.2 dBmW
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
850 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
400 m
SFP transceiver standard:
SR
Fiber cable diameters supported (core/cladding):
50/125 µm
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
LC
Multi-mode fiber (MMF) supported:
Yes
Interface type:
SFP+
Maximum data transfer rate:
10000 Mbit/s
SFP transceiver type:
Fiber optic

Power
Power consumption (typical):Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage.
1 W

Product details

SFP-10G-SR-X Cisco

Cisco SFP-10G-SR-X network transceiver module Fiber optic 10000 Mbit/s SFP+ 850 nm

£51.50 and

SKU: SFP-10G-SR-X

Cisco SFP-10G-SR-X network transceiver module Fiber optic 10000 Mbit/s SFP+ 850 nm

Quick Code: Q3218553 MPN: SFP-10G-SR-X

You need to be logged in to see Prices

Log In For Prices
Dont have an account? Contact Us